Matt Knigge

Guide to Prefab and Modular Homes in Dallas, Texas

Matt Knigge
Guide to Prefab and Modular Homes in Dallas, Texas

For buyers interested in building a prefab home in the Dallas- Fort Worth area, our guide to prefab and modular homes in Dallas aims to address any unanswered questions you may have. These questions may range from the simple, “how much will it cost to build a prefab home in Dallas?” to the more complex, “What prefab home manufacturers serve the Dallas - Ft. Worth area and what are their strengths?”  Luckily our Guide to Building Prefab and Modular Homes in Dallas, Texas has you covered. Within Dallas, we cover areas that are well-suited for building a prefab home such as Highland Park, University Park, and North Dallas as well as surrounding cities such as Fort Worth, Plano, and Arlington. Continue reading to learn more about the prefab and modular home building process in the Dallas - Fort Worth area, or for more specific advice, connect with one of our prefab home experts here.

Why Might You Want to Build a Prefab Home in the Dallas, Texas area?

  • Quicker Build and Installation Times - prefab and modular homes are manufactured off-site, in a controlled environment and then later assembled at the build site. The efficiency of off-site manufacturing facilities often allows for quicker build times

    • Despite sometimes unpredictable weather conditions, the home manufacturing process can continue uninterrupted year round because homes are manufactured off-site, indoors

    • Cost Controlled - with a highly controlled build process (homes are manufactured in climate-controlled warehouses), unforeseen cost overruns can be better managed leading to reduced overall cost. This is especially important for expensive areas in the Dallas - Fort Worth area such as Highland Park, University Park, North Dallas and surrounding towns like Plano, Arlington, South Lake, and Melissa.

  • Sustainable & Modern - many prefab builders that serve Dallas, Fort Worth, Plano, Arlington, Melissa, and the surrounding areas can build energy efficient, net-zero homes. Many manufacturers specialize in homes that are LEED and Passive House certifiable

Key Decisions to Make:

  • Home Location - building in an expensive area of Dallas such as Highland Park, University Park, and North Dallas or an expensive suburb like Fort Worth, Plano, Arlington, or Melissa might have high up-front costs but a prefab home in these (or other high-cost) areas can be a sound long-term investment. When buying property you should be mindful of a few things that could affect your home build:

    • Slope of lot - while this may not be as big an issue in Dallas as in other more hilly areas like San Francisco, building lots with a significant slope may be unsuitable for some pre-engineered floor plans

    • Set back requirements

    • Floor area ratio or other zoning protocols that may affect the size of the home 

    • Whether or not your neighborhood requires a design review

  • Standard vs. Custom - While many prefab manufacturers that operate in Dallas and North-Central Texas offer pre-designed floor plans, some also offer options for partial or total home customization. This is in addition to companies who primarily serve as prefab designers and only work on custom prefab and modular homes. If you live on a tricky lot (uneven terrain, small-lot size, etc.) you may face a limited offering of standard home designs that are suitable for your situation - in these situations a custom home may be your best option. In that case, see our list of the best custom home builders in Dallas.

  • Modular vs. Kit Home v.s. Panelized - While all three of these construction techniques qualify as prefab home building techniques, there are nuances that you should know when building your own prefab house. These prefab home styles include:

    • Modular - homes are made up of multiple box-like modules. These modules are fully assembled and consist of floor, walls, ceiling, wiring, plumbing, and internal fixtures. These modules are constructed off-site and then later shipped to your desired location. Once on site, they are joined and connected to the foundation. Modular construction is one of the most affordable prefab building techniques.

    • Kit Home - all materials and components necessary for building a home are delivered to the build site. In most cases, an owner-builder can assemble the kit home themselves as a cost-saving method.

    • Panelized - the home’s structural components: walls, floor, ceiling, are manufactured off-site and then later constructed at the final site like a traditional build. While somewhat similar to modular construction, panelized building offers more flexibility in the home build process.

  • Architect vs. All-in Company - There are many steps in the prefab home build process. Major steps include land acquisition, home design, manufacturing, and assembly. When selecting a company for your prefab home, you should pay attention to the services your company offers. In some cases the company you choose may only offer a home design your home and therefore sub-contract out the manufacturing process. This leaves you responsible for acquiring land and later finding a builder to assemble the home. Other companies however, may be a one-stop shop and assist you in all stages of the home build process.

  • Financing your home - unless you are planning to pay for your home in cash, you are likely going to need outside financing for your prefab home. The two most common ways of financing a prefab home build are:

      • construction loan - a short term loan that you can refinance once construction is complete

      • temp to perm loan - a construction loan for the duration of construction that converts to a normal mortgage once your house is finished. The advantage of these loans is you only have one mortgage close vs. two with just a construction loan.

    • These methods usually allow you to finance both the land purchase and the construction of your home however, the underwriting and approval process on these loans can be lengthy (60+ days) as the bank is not only underwriting you as a borrower, but also the viability of your building plans. To get land imore quickly, buyers will often pay cash for their building lot and then the lender will credit the land purchase as a down payment percentage on the purchase.

    • Some of the best lenders for these products only operate regionally. Therefore, if you would like assistance we can provide recommendations here.

    • If you’re looking to purchase an ADU (accessory dwelling unit) or tiny home, then you may want to consider a personal loan:

      • Many personal lenders allow you to borrow up to $100k with no down payment

      • These loans are typically amortized over a shorter period than mortgages (up to 12 years)

      • These loans typically don’t underwrite the property and instead underwrite you as a borrower

      • Many of the best personal lenders are online and serve almost the entire country

      • The time to get approved for a personal loan is generally pretty fast (as little as a day to up to a couple weeks)

Common Questions

  • How much will it cost to build a prefab house in the Dallas - Fort Worth area?

    • While certain variables such as location, builder, and floor plan will affect the total cost of building your home, it is our experience that the final cost of your prefab will range between $70 and $490 per sqft before the cost of land, as of June, 2020.

  • Is a prefab home a good investment?

    • Yes, in areas where the total cost of building your prefab home (land cost + building costs)  is less than the average dollar per square foot sales price of homes in your neighborhood i.e. you are able to sell your home for more than it cost to build it. In the greater Dallas, TX area that includes areas where the average sale price per square foot is $275 - $300 per sq ft or higher. This includes most parts of Dallas, Fort Worth, and Arlington, as well as some areas of Plano, South Lake, and Melissa.

  • Can I finance a prefab home in Dallas? 

    • Yes. The most common way to finance a prefab home is a temp to perm loan or a construction loan if you already own the land. This financing method starts out as a loan for the construction of your home and converts to a mortgage once your home is completed. Another financing option is a construction loan which is a short-term loan that you then refinance once the construction process is finished.

  • What do the economics of an investment in a prefab home look like?

    • Our table (below) is an example of what the costs and potential benefits of a prefab home investment might look like. While there may be high up-front costs, there is still a chance for a sizable return on your investment. In Dallas, Fort Worth, Plano, Arlington and surrounding areas, much like other competitive real estate markets in the United States, one of the most challenging parts of the build process is finding a building lot at a reasonable price. In some cases it might be cheaper to buy and tear-down an existing home rather than purchase a vacant, build-ready lot.

Item Unit North Dallas, Dallas, Texas Fort Worth, Texas Plano, Texas Notes
Cost To Build
Cost of lot including closing costs & buyers agent $ 375,000 100,000 125,000
Cost of prefab home + construction $ 800,000 700,000 675,000
Loan Rate 4.00% 4.00% 4.00%
Loan $ 56,400 38,400 38,400 4% APR (interest only), 18 months project time, 20% down
Value of tax deduction $ -19,740 -13,440 -13,440 Assumes income to deduct and 35% marginal tax rate
Total cost to build $ 1,211,660 824,960 824,960
ARV (after repair value) This is the term for post-construction value
$ per sqft comps for new construction $ 335 275 300
Size of new home Sqft 4,000 3,500 3,000
Cost to buy similar home $ 1,340,000 962,500 900,000
Return On A Flip
Sale price $ 1,340,000 962,500 900,000
Cost to Build $ $1,211,660 $824,960 $824,960
Broker Fees $ $80,400 $57,750 $54,000 6%
Closing costs $ $26,800 $19,250 $18,000 2%
Profit before taxes $ 21,140 60,540 3,040
PLEASE NOTE: THESE MODELS ARE NOT GUARANTEES AND SHOULD NOT BE CONSIDERED FINANCIAL ADVICE. THEY ARE FOR EDUCATIONAL PURPOSES ONLY AND PURELY ILLUSTRATIVE EXAMPLES OF POTENTIAL BUYING SCENARIOS. BUYERS SHOULD DO THEIR OWN DILIGENCE BEFORE MAKING ANY PURCHASE.
  • How long will it take?

    • The answer to this question depends a lot on your particular location. Your town’s permitting and building process will play a large role in determining the timeframe for your build. Total, the build process can take between 1-2 years and maybe longer if there is a design review process.

    • Planning Departments in and around Dallas, Texas

Reputable Companies that Serve Dallas, Fort Worth, Arlington, Plano, and the Surrounding Areas

  • Ma Modular 

    • Offers 12 contemporary style homes, ranging in size from 550 sqft to 2300 sqft. 

    • All-in-cost: $165 - $250 per sqft

  • Purcell Timber Frame Homes

    • Has over 51 models of homes all featuring a beautiful timber frame design, including bungalows, cottages, contemporary designs, and more.

    • All-in-cost: $300 - $350 per sq ft

  • Pratt Homes

    • Offer turn-key services on over 85 pre-designed models

    • All-in-cost: $70 - $100 per sqft

  • Alchemy Architects

    • Offers 3 home designs, though the main feature is their weeHouse, a rectangular unit that can be configured in a number of ways to achieve a custom design. 

    • All-in-cost: $250 - $490 per sq ft

  • Acorn Deck House Company

    • With over 70 years of experience and 59 model designs, this company builds a variety of different home styles and sizes. 

    •  All-in-cost: $290 - $420 per sq ft

  • Drop Structures

    • Features a customizable studio home with options ranging from full glass walls, accent walls, solar packages, and Murphy beds. 

    • All-in-cost: $323 per sq ft

  • Deltec Homes

    • Has over 10 models of cylindrical homes, featuring multi-story decks and 360 degree views. 

    • All-in-cost: $180 - $400 per sqft

  • Connect Homes

    • Has 13 home models, all with a modern boxy aesthetic.

    • All-in-cost: $260 - $390 per sqft

  • Kanga Room Systems

    • Offer turn-key services within the DFW area on over 40 pre-designed floor plans

    • All-in-cost: $200 - $250 per sqft

Alternatively, see our list of prefab home builders and modular home builders in Texas or our list of tiny homes for sale in Texas. For project-specific assistance, speak with a member of our Prefab Concierge program.